WRGB LIGHT STRIP – INDOOR (10M)
Registrate para ver precios
The jumper provides a solder-less way to connect bare wires to the strip that has been cut. These can either be used to make an all new strip when connected directly to a driver or can be used to split a strip like when doing undercabinet lights on either side of a range.
SPECS
Connection
- WRGB strips require a 5 wire connection (use one of STP-WRGBJUMPER-00 to add a new connection)
Ratin
- Voltage: 24V DC
- Energy Consumption: 23W per Meter
- Light Output: 1000 Lumens per Meter
Dimensions
- Height: .12 in (3 mm)
- Width: .47 in (12 mm)
- Length: 32.8 ft (10 M)
- Connectors add 2mm x 4mm
Environmental
- IP20 rated
Información adicional
Peso | 0.5 kg |
---|---|
Dimensiones | 10 × 10 × 10 cm |
Marca |