AIVA

Imagen de usuario
Cart 0 $0.00,(USD)

LOW VOLTAGE DMX DRIVER WITH 10A EXTERNAL POWER SUPPLY

DMX-DRIVER3-00

Registrate para ver precios

Savant’s separate DMX driver and power supply can be used to drive any of Savant’s Light strips. Savant recommends using this driver for up to 10 meters of any type of strip at full intensity. Expand control options by pairing with Savant’s DMX controller, allowing the strip type to be selected for proper control.

KEY FEATURES

  • Usable with WRGB/Neon/Tunable White Pro Strips
  • Recommended for lengths up to 10M
  • Configures easily through Savant and RDM
  • DMX controller can be located separately for more installation flexibility

DOCUMENTS

  • DMX and 0-10V Lighting Deployment Guide [da Vinci 9.0 and Higher] View
  • Low Voltage Lighting Deployment Guide [da Vinci 8.10.1 and Lower] View
  • TrueImage - Savant University View
  • Lighting & Shades Manager Overview - Savant University View
  • Introduction to Daylight Mode - Savant University View
  • Lighting and Keypad Programming Guide [9.0 and higher] View

WARRANTY

Basic warranty period is two (2) years excluding misuse defined as abuse, accidental damage, modifications, improper wiring, improper repair, incorrect repair, and operation outside specified operating temperatures and humidity. For further warranty information on this product please refer to the Savant New Product Limited Warranty document.

Learn more

SPECS

Kit is made up of 2 products a driver and separate power supply, power supply specs below driver specs:

Driver

Strip Control

  • 4 channels for support of Tunable white, RGB, or WRGB (defined by Controller)

+ addational channel for future use

Control Ports

  • - 3 pin DMX
  • - RJ45 in
  • - RJ45 out
  • - XLR in
  • - XLR out

Power

  • 12-24VDC max current 40A
  • Standby power under 1 Watt

Dimensions

  • Height: 2.87 in (73 mm)
  • Width: 6.46 in (164 mm)
  • Depth: 1.49 in (38 mm)
  • Weight: 1.30 lb (0.59 kg)

Environmental

  • Temperature: -4° to 122° F (-20° to 50° C)
  • Humidity: 10% to 95% (non-condensing)

Power Supply

Power

  • Input: 100-240V AC 50/60 max current 4A
  • Output: 24V max current 10A

Dimensions

  • - Height: 2.7 in (68 mm)
  • - Width: 9.6 in (244 mm)
  • - Depth: 1.5 in (38 mm)

Environmental

  • Temperature: -4° to 122° F (-20° to 50° C)
  • Humidity: 10% to 95% (non-condensing)
  • IP67 rated

Información adicional

Peso3 kg
Dimensiones3.8 × 10 × 7.3 cm
Marca

My cart
Your cart is empty.

Looks like you haven't made a choice yet.