DMX DRIVER WITH INTEGRATED POWER SUPPLY
DMX-DRIVER1-00
Registrate para ver precios
Savant’s Integrated DMX driver can be used to drive any of Savant’s DMX Light Strips. Savant recommends using this driver for up to 5 meters of any type of strip. Using Savant’s DMX controller the strip type can be selected for proper control.
- Usable with WRGB/Neon/Tunable White Pro Strips
- Recomended for lengths up to 5M
- Configures easily through Savant and RDM
- DMX and 0-10V Lighting Deployment Guide [da Vinci 9.0 and Higher] View
- Low Voltage Lighting Deployment Guide [da Vinci 8.10.1 and Lower] View
- TrueImage - Savant University View
- Lighting & Shades Manager Overview - Savant University View
- Introduction to Daylight Mode - Savant University View
- Lighting and Keypad Programming Guide [9.0 and higher] View
Basic warranty period is two (2) years excluding misuse defined as abuse, accidental damage, modifications, improper wiring, improper repair, incorrect repair, and operation outside specified operating temperatures and humidity. For further warranty information on this product please refer to the Savant New Product Limited Warranty document.
Learn more
SPECS
- 4 channels for support of Tunable white, RGB, or WRGB (defined by Controller)
- 3 pin DMX
- 100-200V AC 50/60Hz with max circuit draw of 1.2A
- 201-277V AC 50/60Hz with max circuit draw of 0.6A
- Standby power under 1 Watt
- Height: 2.52 in (64 mm)
- Width: 9.6 in (244 mm)
- Depth: 1.26 in (32 mm)
- Weight: 1.5lb (0.68 kg)
- Temperature: -4° to 122° F (-20° to 50° C)
- Humidity: 10% to 95% (non-condensing)
Información adicional
Peso | 3 kg |
---|---|
Dimensiones | 27 × 15 × 9 cm |
Marca |